Ergonomic Equipment & Supplies

Verity NeuroTrac Rehab, Dual Channel TENS and NMES Unit

$299.95
Available
SKU
VER-REHAB

Advanced, modern digital dual channel TENS and EMS unit featuring a remote switch. TENS and EMS treatment modes provide maximum flexibility for pain relief, muscle strengthening and rehabilitation.

Specifications

  • Dual channel: individually isolated circuits.
  • Amplitude: 0-90 mA into 500 Ohm load ; indication only. Actual mA will tend to be less than indicated due to electrode impedance: at 1000 Ohms load (Electrodes in poor condition) the maximum will be limited to 70 mA, at 1500 Ohms load the maximum will be limited to 65 mA.
  • Type: Constant Current, maximum output voltage 180 Volts +10 / -30 Volts.
  • Waveform: Asymmetrical, rectangular bi-phasic with zero DC current.
  • Selectable pulse width: 50 ìS – 450 μS [2% accuracy].
  • Pulse Rate selection: in the continuous mode 2 – 200 Hz [2% accuracy].
  • Mode: Continuous, Burst or Modulated.
  • Burst mode: Bursts of 9 pulses [200 μS] at 150 Hz or 185 Hz, over 2 seconds.
  • Modulation mode: 6-second cycle of concurrent width modulation and pulse repetition rate modulation. TENS 7: Width starting at50 ìS and increasing exponentially to 250μS in three seconds and then returning back to 50 ìS in the next three seconds. Rate starting 20 Hz, increasing exponentially to 85 Hz and then returning to 100 Hz. TENS 8: Width fixed at 200 μS. Rate starting 32 Hz, increasing exponentially to 100 Hz over 3 seconds and then returning to 32 Hz in the next 3 seconds.
  • Time duration of the custom programmes selectable: 1 minute to 12 hours.
  • Low Battery Indicator: If the battery goes below 6.9 volts +/- 0.2 volts the battery symbol will flash on/off once every second.
  • If the battery voltage is below 6.6 (+/- 0.2) volts the unit will not turn on.
  • Open Electrode Detect: If an open circuit is detected at the output of channel A or B the output current will be reset at zero.
  • Physical dimensions: 119.2 x 69 x 28.7 mm
  • Weight: 0.07KG without battery, 0.1KG with battery.
  • Environmental Conditions for use: +5 to +40 degrees Centigrade. 15-90% Humidity.

Accessories supplied with this device:

  • Dual lead wire x 2
  • Self-adhesive electrodes (50 x 50mm)
  • 9V PP3 battery
  • Soft bag
  • Operating manual
  • Gift box

 

Warranty Information

  • Two (2) year warranty on unit only

 

 

Shopping with Confidence!

We appreciate that you want to shop with confidence online. And so Bad Backs wishes to confirm the importance we place on your privacy, security, our returns policy and customer service support.

Should you choose to shop in-store, visit one of our stores in Melbourne, Sydney or Perth.    Click here for our store locations

More Information
Brands NeuroTrac
Free Shipping No
Click and Collect Available No
Write Your Own Review
You're reviewing:Verity NeuroTrac Rehab, Dual Channel TENS and NMES Unit
Your Rating